Ten new solutions appear in MWC23 and move towards 5G
Posted ime:2023-02-17 17:17:11 read:times
1. ELAA technology continues to make breakthroughs, MetaAAU is upgraded again, and "0 bit 0 Watt" achieves the lowest energy consumption and the best energy efficiency
Through the integration and innovation of advanced software and hardware technologies such as Ultra Large Array Antenna (ELAA) and AHR algorithm, the new MetaAAU can not only achieve excellent coverage with extreme energy efficiency, but also achieve extremely low energy consumption under low load: under the same coverage, the energy consumption is reduced by 50% compared with the traditional AAU; When idle, the power consumption is further reduced to less than 10 watts.
2. The industry's largest bandwidth is 800MHz MetaAAU, and a single module can meet the C-Band's full bandwidth minimal deployment; Meta BladeAAU, the industry's highest integration, supports the strongest configuration of Sub-6GHz full-band in a single day
For spectrum discrete scenarios, Huawei launched the industry's largest bandwidth of 800MHz MetaAAU. Thanks to the leading ultra-wideband radio frequency, power amplifier technology and algorithm innovation breakthrough, the ultra-wideband MetaAAU can cover the full bandwidth of C-band and realize the minimal deployment of 3400MHz~3800MHz and 3800MHz~4200MHz spectrum newly released in the future.
Facing the limited scenario, Huawei innovatively integrates Meta technology with Blade technology and introduces Meta BladeAAU. The new Meta BladeAAU can realize the simple deployment of Sub-6GHz full-band one pole: the active part is upgraded to MetaAAU to realize the TDD band performance and energy saving; The passive part is upgraded to 2L8H, which can support the optimal configuration of Sub-3GHz on demand.
3. The industry's lightest macro station M-MIMO, with a weight as low as 12kg
Through continuous system engineering innovation of M-MIMO, Huawei's new 32T32R macro station M-MIMO single module weighs only 12kg. While ensuring performance, the weight is the lightest in the industry, which can realize single-person installation and single-hand handling, and improve the efficiency of operator network construction.
4. The industry's lowest energy consumption is ultra-wideband 4T4R RRU, FDD full-band full-system deployment is worry-free, and power consumption is reduced by another 20%
Huawei's ultra-wideband FDD RRU series has always maintained the lowest energy consumption in the industry. Through the introduction of the latest hardware and algorithms, the ultra-wideband 4T4R RRU will reduce energy consumption by an additional 20% while meeting the requirements of FDD full-band and full-standard minimal deployment. At the same time, the software solution will be upgraded again: the built-in PIM cancellation technology will remove the worries behind the interference; SingleCell improves the user experience at the edge of the cell by 20%.
5. The industry's strongest performance ultra-wide band 8T8R RRU has the best all-weather energy consumption in the whole scene, and the performance increases by another 40%
Thanks to the 5G NR high-precision beamforming technology designed for the FDD frequency band, the ultra-wideband 8T8R RRU can simultaneously improve the network capacity and coverage and increase the experience by another 40%. At the same time, in the medium and heavy load scenarios, Power-Boosting technology can achieve 100% dynamic power sharing between carriers and systems, and achieve a 30% reduction in power consumption under the same performance; In the light load scenario, Power-Adapting supports power on-demand scheduling to achieve the basic power consumption of 8T8R and 4T4R.
6. The industry's only large-scale commercial FDD MM with the strongest performance; FDD BladeAAU, Sub-3GHz single derrick deployment is the simplest
Huawei FDD M-MIMO has been widely commercialized in the world on a large scale, increasing its capacity by up to five times. The newly released FDD BladeAAU is the deep integration of FDD M-MIMO and advanced transparent antenna technology, which can achieve the optimal coverage of Sub-3GHz and the ultimate capacity, and realize the simple deployment of a single holding pole.
7. The industry has the highest integration of LampSite5.0, the simplest deployment, the best energy consumption, and the original distributed M-MIMO leading the ubiquitous gigabit
Huawei LampSite 5.0 solution, 3G/4G/5G multi-frequency and multi-system integration, high integration design to reduce weight and volume by 25%, and overall station energy consumption by 40%. Combined with the industry's only distributed M-MIMO interference as gain, it will bring 4 times of network capacity improvement, and realize the ubiquitous gigabit experience, which has become a must for airports, stadiums, shopping malls and other scenes.
The ten new solutions to be released by Huawei will help operators efficiently evolve from full-band to 5G and provide users with the best mobile network experience through several unique innovations in the industry. Facing the future, Huawei will continue to cooperate and innovate with global customers to win the 5G golden era.
